Welcome
Current Projects
Proto-II™ Walls
Brick
Block
Stone
Thin-Cut Stone Veneer
Manufactured Stone
Flagstone + more
Precast Concrete
Paver Bricks
Fireplaces
Restoration
Point Loma Project
Mount Helix Project
Hubbard House
Before & After
Testimonials
Sponsorship
Suppliers
Contact Us
e-mail me

SAN DIEGO MASONRY CONTRACTORS | CURRENT PROJECTS | KEN TIDWELL MASONRY


lavell22.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - We just finished this chimney stack in time for Santa! Our client had a veneer that was falling off. We replaced it with the Pagosa Springs, Eldorado Stack stone. We gave it a detail with brick. MERRY CHRISTMAS EVERYBODY!
KEN TIDWELL MASONRY


lavell013.JPG

9325 LAVELL ST. MOUNT HELIX LA MESA - Well, we started this project doing a little repair on the top of the chimney. Some of the manufactured stone had fallen of. The person that installed these pieces, had just stuck them to the paint. Our client asked if we could remove the other pieces to the roof line and install a new veneer that is done correctly.
KEN TIDWELL MASONRY


lavell3.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - We removed the veneer that was originally agreed upon. In doing so, we discovered that all of the pieces were being held up with the old paint that was on the chimney. We talked with our client about the danger of the pieces falling off and recommended that the entire veneer be removed and replaced. They agreed.


lavell6.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - We removed the veneer and it came off in sheets. Evidence that we were correct in that the pieces were a danger from falling. After everything was removed, we attached the metal lath prior to the scratch coat. This is where whoever installed the veneer went wrong. They didn't put a scratch coat over the painted chimney before installing the manufactured stone veneer.


lavell4.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - We got the scratch coat up and are ready to install the manufactured stone veneer. We will be using the Pagosa Springs, Stack Stone by Eldorado Stone. This product is being purchased from RCP BLOCK AND BRICK and their website is HERE.


lavell2.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - We are about halfway done with the veneer. We discussed adding a detail with our clients. The detail is a thin-brick on each corner of the face of the chimney stack.


lavell5.jpg

9325 LAVELL ST. MOUNT HELIX LA MESA - The thin-brick is the Embarcadero by McNear Brick. This also is being purchased from RCP BLOCK AND BRICK. We'll have this chimney back in shape in time for Santa!
KEN TIDWELL MASONRY


webb001a.jpg

2250 COLONY TERRACE, ENCINITAS - We have completed this project.


[ First ] [ Prev ] [ Next ] [ Last ]